Founded in 1990, China Famen Bearing Co., Ltd. is specialized finger joint manufacturer and finger joints distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

The CMT Finger Joint bit lets you make incredibly strong side-to-side or end-to-end joints in all wood and wood composites. The tightness of the joint and the maximum glue surface create a joint that is actually stronger than solid wood. CMT's Professional Finger Joint features two flute blade design, carbide teeth and six removable blades to make joints in stock from 1/2" to 1-3/8". Ideal for molding manufacturers and furniture makers. 1-3/8-inch diameter, 1/2-inch shank. Ground carbide with titanium for long life. Anti-kickback. Computer balanced for vibration free operation speeds over 22,000 RPM. Impervious to chemical attack. Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Promoting safer woodworking is the reason Freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 RPMs of most routers. Freud's philosophy is woodworkers should expect safety, not pay for it.

Thick micrograin carbide tips. Kickback reducing design. Covered by Freud's limited lifetime warranty. Make finger joints quickly and efficiently with these stackable finger joint cutters. Each UP250 cutter will make a strong joint in 5/8-inch-inch stock and can also be stacked with additional finger joint cutters to accommodate thicker material. 3-9/16 inch diameter, 25/32 carbide height. Covered by Freud's limited lifetime warranty. Ox recommends this U-joint to be used with the following axles: Genuine Gear, Yukon, Warn, and Superior. Use only with heavy-duty axles with full clip capability. If your axles are not of the type Ox recommends, the U-joint may not fit. They suggest you check for clearance before installing on your vehicle and Do not use this U-joint with stock axles. Grease U-joints periodically according to usage. We recommend Amsoil Racing Grease.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!