Founded in 1990, China Famen Bearing Co., Ltd. is specialized flange bearing manufacturer and flange bearings distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

Out Cylinder and Balls are made of Bearing steel( GCr15), Retainer is made from Resin.
High precision and quality, completely interchangeable, low noise.
MYT Single Packing
Oil impregnated sintered bronze flange bearings are available in many different shapes and sizes, but the selections are slim down in the .1875" ID range. The bearings shown are actually made by slicing a longer bearing in half. The flanged part has a 3/64" flange, and is cut so that the bearing extends 1/8" (full depth) into the larger of the two hinge channels. The remaining part of the bearing is then machined down to 1/8" length and is used on the inner 1" channel. Because there is no flange on the inner hinge, an aluminum or nylon spacer must be installed around the bolt as a positive means of preventing the spacer from slipping out of the hinge.

As the igubal flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment.
According to type, igubal flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error.
For shafts, igubal flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!