Founded in 1990, China Famen Bearing Co., Ltd. is specialized motor pulley manufacturer and motor pulleys distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

Matshushita M1049GE. MXN-13FB11D PM Motor. MFG: Matshushita Ind. Co. Ltd. Size: 25 Dia, 46 L with shaft [mm]. Weight: 48 Grams. Shaft: 1.5 mm Dia, 9 L [mm]. Motor start to rotate: 1.5 VDC. Motor current: approx. 20-30 mAmp no load. Motor resistance: 15 Ohms - approx. Bronze sleeve bearings. Dual plastic pulley. The motor used is a high quality DC motor that operates off of a 12 volt battery. The motor controller is neatly self-contained contained motor pod. The pod weights in at a hefty 25 pounds and is comprised of a solid brass billet base, and a hardwood top plate that secures the motor in place. Please note the pulley. It is a 2 belt pulley that has a flywheel machined at the base of the pulley for extra torque. Attention to details can be found throughout the turntable, as illustrated by the brass and matching wood control knobs. The actual cost is very minor, but the results reflect the pride Sound Engineering takes in its products.

Bore: 3/4"
Pitch Dia.: 4"
Standard Keyway W x D: 3/16" x 3/32"
Just like our single V-groove pulleys, these solid cast iron double V-groove pulleys are machined and statically balanced to provide the smoothest power transmission possible. For A belts. Pitch diameter: 4", Bore: 3/4", Standard Keyway W x D: 3/16" x 3/32". This stiff suspension, especially for quite a high mass table makes it very stable and easy to cue, but as with anything that goes against the majority I needed to know why. Bluenote said that the turntable primarily acted as a solid plinth design with the suspension offering less isolation than normal - now there are bloody battles between the solid vs. suspended brigade so perhaps Bluenote are on to something by splitting the two? The one undeniable advantage is it makes it a doddle to set up and easy to use. Lastly for the couple of people who've implied that the Bluenote is a Michell copy, all I can do is point you to the above description which shows that the Bluenote is fundamentally different in almost every respect, the only similarity being the use of acrylic, a Michell trademark, but hardly unique, and Michell was certainly not the first to do it.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!