Founded in 1990, China Famen Bearing Co., Ltd. is specialized rigid coupling manufacturer and rigid couplings distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

Rigid Conduit Coupling, Conduit Size 1 1/4 In, Material of Construction Galvanized Steel, Standards UL 6, ANSI C80.1, B1.20.1. For applications requiring axial run-out less than 0.001 TIR, one-piece Accu-Clamp(TM) Coupling incorporates integrally machined, self-centering clamping collars at both ends. It eliminates conventional longitudinal slot and provides close tolerance bore and keyway. Available in sizes from ½ x ½ in. to 1½ x 1½ in., coupling is machined from steel and is optionally offered in aluminum or stainless steel. Stafford's Accu-Clamp(TM) Coupling is a one-piece rigid coupling that incorporates integrally machined, self-centering clamping collars at both ends for applications requiring less than 0.001 TIR axial run-out. Permitting precise shaft alignment, this coupling eliminates the conventional longitudinal slot and provides a close tolerance bore and keyway. Available in sizes from ½" x ½" to 1-½" x 1-½", Stafford's Accu-Clamp(TM) Coupling is machined from steel as a standard product and is available as a special in either aluminum or stainless steel.

Used to join two lengths of threaded rigid or IMC conduit. Galvanized steel. Bulk. Sold as each. Used to join two lengths of threaded rigid or IMC conduit. Galvanized steel. Bulk. 1-1/4". Manufacturer number: 02-55083. Buy Hardware Supplies SKU #: 3179421. Country of origin: United States. Distributed by Gam-Pak Products. RIGID COUPLINGS - Use to join threaded Rigid or IMC conduit ~ Galvanized steel ~ Packed in tray box. The Dalton ROSDC (Rigid Overload Safety Device Coupling) provides overload protection through the use of an OSD unit combined with a rigid coupling half counterbored to fit the OSD flange. All steel rigid coupling half is bolted to a basic OSD unit to form a rigid coupling with the overload feature. The ROSDC can be set with a torque wrench for maximum load desired. The unit funcitons as a rigid coupling until an overload occurs, causing the ROSDC to disengage. The device is automatically re-engaged when the overload is eliminated.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!