Founded in 1990, China Famen Bearing Co., Ltd. is specialized sleeve bearing manufacturer and sleeve bearings distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

The bearing consists of a self-lubricating woven Teflon? fiber and polyester fiber liner supported by a filament wound continuous fiberglass fiber and epoxy resin matrix.
Size range
Standard and special inch and metric sizes are available from 1/8” to 26” inside diameter.
Bore shapes
Many bore shapes are available including round, square, hex, spherical, helical hex and threaded. Other custom shapes are also available.
Load Capacity
Typical dynamic loads:
4,000 to 30,000 psi
Ultimate strength:
77,000 psi (for 1/8” wall section)
Motion
The bearings work well in oscillatory, pivot, linear sliding and slow speed full rotation.
Friction
Duralon? bearings offer low-friction operation. Friction decreases with increasing load. Friction coefficients vary from .16 @500 psi to .07 @ 20,000 psi.
Self-lubricated
The bearing operates self-lubricated by Teflon? transfer to the shaft surface caused by relative movement between the shaft and bearing liner under load. Lubrication can be used if desired. Consult a Rexnord engineer for approved lubricants.

NORGLIDE? sleeve bearings are self-lubricating, lead free, plain bearing and they are custom manufactured to reduce maintenance and lower friction. Sleeve bearings are available with a flexible bearing tape or with a metallic backing. Using a wear resistant PTFE with the addition of appropriate fillers gives the material specific properties which can alter its strength and coefficient of friction and allows it to be used in many different applications.
NORGLIDE? maintenance free sleeve bearings feature:
Sizable liner for optimal fit
Maintenance-free, self lubrication
Corrosion resistant for extreme environments and climates
Low coefficient of friction
Available in custom sizes and shapes to fit specific applications
Multiple proprietary formulations of material eliminates noise and squeaks
A wide operating temperature

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!