Founded in 1990, China Famen Bearing Co., Ltd. is specialized thrust bearing manufacturer and thrust bearings distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

The turntable bearing is a kind of combined bearing with axial and radial cylindrical roller .It is composed of two thrust roller bearing and a face-to-face cylindrical roller bearing. It carries axial and radial pre-load. There are many bolt holes in the inner ring and outer ring in order to transportation and installment. The whole bearing adopts locating bolt to fix .It is most suitable to apply to machine tools or other precise machinery rotary working table or graduated disc. This set fits Delta and Jet 14" bandsaws and most clones. It includes top and bottom bearings and installation instructions. 3/8" i.d., 1-3/16" o.d. The ATB propeller thrust bearing by RENK allows an unequalled compact arrangement of the external thrust bearing and elastically-supported gear unit. This patented construction of hydraulically-supported thrust pads provides for a direct attachment of the bearing on the gear unit. The usual minimum distance of 10 times the shaft diameter can be done without. As a consequence, the propeller thrust can be measured continuously without any extra appliance.
Before the development of the RENK ATB it took a lot of time and money to incorporate the oil distribution box for the c.p. propeller into the shaft train of elastically-supported gear units. A design variant of the ATB now allows to directly mount the O.D. box onto the gear unit, analogous to the rigid support.

Cylindrical thrust bearing. Medium duty - 600 Series. 1" to 3" bore. 26 sizes. One row of rollers. Heavy duty - 700 Series. Bore sizes above 3". Six different styles: single acting, aligning, double acting, up to 5 OD for a given bore size. Tapered thrust bearing. Inch dimension. 4" to 16" bore. 8 ?quot; to 34" OD. Two design styles: TTHD and T-Flat. A bandsaw's thrust bearings are often the weakest link in the blade guide system. Even if you've smoothed the blade's back and rounded its corners, the pressure put on the thrust bearings in the process of cutting thick wood can wear out OEM bearings (a tempting place to save manufacturing costs) lickety-split. If your saw's thrust bearings are sloppy, frozen, scored, or feel gritty when you spin them, then they're overdue for replacement. These high-quality replacement bearings made by Iturra are double-sealed with rubber O-rings to keep out sawdust and contaminants. They are factory lubricated with high-temperature grease and if their faces get scored, you can reverse them for extended life.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!