Founded in 1990, China Famen Bearing Co., Ltd. is specialized woods coupling manufacturer and woods couplings distributor of all types of custom and cheap bearings. We obtained ISO9002, ISO14001, and QS9000 certificates in 1995 and 1996, 1999 respectively. Other advanced equipments include four RGB and RCI series heat treatment production lines with a treatment quantity totaling 1,500 kilograms per hour. The Multi-points temperature control meters and CNC display meters with bi-directional control have been adopted to complement these units.

The Pump Rod Coupling should be a high quality component that will not fail in service. Too often the view is that "any old coupling will do". This is dangerous thinking as the annoyance caused when a coupling fails is greater than anything else in the entire windmill system.
Couplings available are:-Brass (Hexangonal) Pump Rod Coupling. Galvanised Steel (Hexangonal) Pump Rod Coupling. Wood Rod Coupling. Wood to Steel Coupling. Brass BSP to Whitworth Coupling. Poly Rod Coupling (Male and Female). Poly Rod Adapter. Quick Coupling (to join to the Windmill). These couplings are used to join the Pump Rods, or to join the Pump Rod to the Pump. They are used inside steel column to minimise the wear (rubbing) inside the pipe. Couplings are made from Hexangonal DR (dezincification resistant) Brass. They are available as female/female couplings with Whitworth threads, in sizes 3/8", 1/2", 5/8", & 3/4", 1/2" x 5/8", 1/2" x 3/4", 5/8" x 3/4", 3/4" x 1".

TB Wood's Grid coupling continues the tradition of the original Bibby Resilient Coupling, invented by Dr. James Bibby. The coupling is designed for long life under tough application conditions. Taper Grid replacement and maintenance can be performed quickly and easily without the need to move and realign connected equipment. Sizes 1020 through 1140 in-stock and interchangeable with industry standard designs. Positive protection against damaging effects of shock loads and vibration, Proven interchangeable industry design, allowing for easy replacement of component parts, Horizontal T10 and Vertical T20 design options in stock and available, In stock inventory of sizes 1020 through 1140, accommodating up to 7.25" diameter shafts, When we strobe the coupling in service, we can see it distorting, and the metal center retaining ring starts to bend off to the size. When we look at the sizing of this coupling, it is borderline #9 and perhaps should rather be a #10. However, none of the other three similarly loaded pumps have these problems with #9's.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!